Tank and Reservoir Options

A power up and down assembly featuring an all-cast iron valve body with a chrome spool and a high-quality relief set to 3250 psi.

It is mounted on a 21-quart reservoir with a 10-micron strainer, 1 1/4" pipe thread outlet.

Can be operated with the 130-016 push pull cable or upgraded to air operation. Our 120-284 toggle air kit has everything you need to install the air system including a toggle switch in the cab and air lines.

This is the standard valve tank combo in all our LL 400 thru LL800 hoists packages.

A power up and gravity down assembly featuring an all-cast iron valve body with a chrome spool and a high-quality relief set to 3600 psi.

It is mounted on a 50-quart reservoir with a 10-micron strainer, 1 1/4" pipe thread outlet.

Can be operated with the 130-016 push pull cable or upgraded to air operation. Our 120-284 toggle air kit has everything you need to install the air system including a toggle switch in the cab and air lines.

This is the standard valve tank combo in all our LL 1000 thru LL3000 hoists packages.

A double valve  system that is designed for operating the hoist and a dump gate, auger, or any other reason a second valve would be needed. The first valve is our power up and down valve set at 3250 psi. The second valve is also power up and power down with a pressure rating of 1500 psi that can be adjusted up to 3250.

Both valves feature an all-cast iron valve body with a chrome spool for long life and durability. Mounted on a 60-quart reservoir with a 10-micron strainer, 1 1/4" pipe thread outlet.

Can be operated with the 130-016 push pull cable or upgraded to air operation. Our 120-284 toggle air kit has everything you need to install the air system including a toggle switch in the cab and air lines.

Designed for use with the LL 400 thru LL 800 hoists    where a second valve is needed.

This double valve  systems are designed for operating a hoist and a dump gate, auger, or any other reason a second valve would be required. The first valve is our power up and gravity down valve set at 3600 psi.  The second valve is power up and down with the pressure set at 1500 psi both directions. 

These valves also feature an all-cast iron valve body with a chrome spool for long life and durability. Mounted on a 60-quart reservoir with a 10-micron strainer, 1 1/4" pipe thread outlet.

Can be operated with the 130-016 push pull cable or upgraded to air operation. Our 120-284 toggle air kit has everything you need to install the air system including a toggle switch in the cab and air lines.

With Pressures set at 3250 psi up and down it is also the perfect choice for retrofitting, or any rebuild.

For LL 1000 thru LL3000   hoists packages.

Our basic power up and down 12 volt activated valve. for LL400 - LL 800  models.  

Mounted on a 21-quart reservoir with a 10-micron strainer, 1 1/4" pipe thread outlet, Deutsch connectors, and 2 button pendant style remote. Pressure relief set at 3250 psi.

Made for ease of installation.  Supply 12 volts to the valve, route the pendent into the cab.  Plumbs like any other valve. Fast and easy.

Oil supplied from your PTO driven pump at up to 10 gpm.

Eliminates the need for difficult to route push pull cables or slow 12-volt pumps. 

Our  premium  power up and down 12 volt activated valve for LL400 - LL800 models. 

When safety and longevity is the top priority.

Mounted on a 21-quart reservoir. This valve features a load holding valve  to aid in preventing an uncontrolled drop. Integral 100 micron oil filter. Sealed Deutsch connectors, and 2 button pendant style remote, with pressure relief set at 3250 psi. Oil supplied from your PTO driven pump at up to 10 gpm.

Made for ease of installation.  Supply 12 volts to the valve, route the pendant into the cab. Plumbs like any other valve. Fast and easy.

Eliminates the need for 'difficult to route' push pull cables or slow 12-volt pumps. 

Comes with a 2-button pendant and a 25” cord. Or order the 125-794 and get it less remote and do your own wiring to a dash switch.

130-205 Is an Electric over hydraulic single motor and single valve unit: 

Powered by single 12volt electric motor with our exclusive power up, power down, or gravity down three-button controller. Wireless option available. Is designed for the LL400 thru LL800 hoists. Provides reliable operation with lower cost. Raise times from 30 seconds to 1 minute depending on hoist model.

Our two-valve electric over hydraulic valve pump combination.  Use this option where you need two hydraulic systems such as running a hoist and a dump gate.

This unit is engineered for reliability and longevity at an affordable price. Use with LL400 - LL800 Models.

The first valve operates at 3200 psi up and 1500 psi down. The second valve operates at 3200 psi up and 700 psi down.

Reservoir supplies 4 qts useable oil from a single reservoir.

Supplied with a 4-button remote (Power up, power down) and a 25’ cord. 

Twin motor single valve electric over hydraulic pump valve combination.

When our 130-205 will not raise your hoist fast enough this twin motor unit will nearly double the lift speed on those large cylinder hoists. 

Ideal for our LL 700 and LL800 models. Used on LL400 - LL800's. 

Pushes 3200 psi and 2 gpm. Perfect for the customer that wants faster cycle times on the truck or trailer that is not PTO compatible.

Supplied with a 15’ cord and a 3-button remote. And all the hoses and fittings you need.

Gear pump  

USED ON THE LL400 THRU LL600  

DISPLACEMENT GEAR SIZE 1.24

6 TO 18.8 GALLONS PER MINUTE

DO NOT SPIN THIS PUMP SLOWER THAN 900 RPM OR FASTER THAN 3000 DAMAGE TO PUMP WILL OCCUR THAT IS NOT COVERED BY WARRANTY.

Tafco would like to see this pump running about 1300 rpms to get 8 gpm. Do not forget your pto speed and engine rpm are not the same thing. Pto’s run anywhere from 85 to 140% of engine speed.

Pressure 3250 PSI 

Shaft size 5/8" - 9 spline

Flange 2 bolt SAE “A“ flange

Gear Pump 

USED ON THE LL650 THRU LL3000 

DISPLACEMENT GEAR SIZE 2.36

10 TO 30 GALLONS PER MINUTE 

DO NOT SPIN THIS PUMP SLOWER THAN 900 RPM OR FASTER THAN 3000 DAMAGE TO PUMP WILL OCCUR THAT IS NOT COVERED BY WARRANTY.

Tafco would like to see this pump running about 1800 rpms to get 18 gpm. Do not forget your pto speed and engine rpm are not the same thing. Pto’s run anywhere from 85 to 140% of engine speed.

Pressure 3250 PSI

Shaft size 7/8" - 13 spline

Flange 2 bolt SAE “B” flange