Montacargas Scott Level Lift LL-400 a LL-800

Subframe available 

Greater Capacity - 9'-14' Bodies - Class C

• * 6 3/4" Mounting Height (minimum) - Mounts with 5 7/16" & Larger Long Sills
• *Pump Set at 3250 PSI (pump options) * Cylinder 5" & Chrome Shaft * Stroke 16" 
• *Approximate Weight 452 lbs.  With subframe *approximate Weight 660 lbs.

LL-500 Lifting Capacity Chart Measured in Tons - 3200 PSI

Note:  (Use hoist calculator to estimate capacity)  

>>HOIST CALCULATOR CLICK HERE<<

Overhang based on 47" from center line of tail hinge pin to center line of truck axle, with 2" clearance between cab and body.         

Capacities (Tons) are for a water level load including body weight plus payload weight, and assume payload to be centered in body front to back           

Chart does not cover all mounting conditions. Call Tafco @ 507-526-3247 

LL-500 Not applicable for Chev/GMC 60" chassis due to fuel filler interference.                                                                                                                                                             

(* electric pumps decrease capacity by approximately 10%) 

Lighter Weight - 9'-16' Bodies - Class D

• *7 5/16" Mounting Height (minimum) - Mounts with 8" & Larger Long Sills
• *Pump Set at 3250 PSI (pump options) * Cylinder 5" & Chrome Shaft * Stroke 19" 
• *Approximate Weight 600 lbs.

LL-600 Lifting Capacity Chart Measured in Tons - 3200 PSI

Note: (Use hoist calculator to estimate capacity)  

>>HOIST CALCULATOR CLICK HERE<<

Overhang based on 32" from center line of tail hinge pin to center line of truck axle, with 2" clearance between cab and body.         

Capacities (Tons) are for a water level load including body weight plus payload weight, and assume payload to be centered in body front to back   

 Chart does not cover all mounting conditions. Call Tafco @ 507-526-3247                                                                                                                                                 

(* electric pumps decrease capacity by approximately 10%) 

(Scissor Hinge Back) Subframe available

LL-650  - 9'-16' Bodies - Class D

• *10 11/16" Mounting Height (minimum) - Mounts with 11" & Larger Long Sills
• *Pump Set at 3000 PSI (pump options) * Cylinder 5 1/2" & Chrome Shaft * Stroke 21" 
• *PTO Pump set at 3250 PSI *Approximate Weight 536 lbs. With subframe approximate Weight 683 lbs.
• *Optional Electric Pump Cabinet - Optional Subframe Extension 

LL-650 Lifting Capacity Chart Measured in Tons - 3300 PSI

Note:  (Use hoist calculator to estimate capacity)  

>>HOIST CALCULATOR CLICK HERE<<

Overhang based on 47" from center line of tail hinge pin to center line of truck axle, with 2" clearance between cab and body.     

 Capacities given include body weight plus payload weight, and assume payload to be centered in body front to back 

 Chart does not cover all mounting conditions. Call Tafco @ 507-526-3247                                                                                                                                                                     

(* electric pumps decrease capacity by approximately 10%) 

Subframe available

Greater Capacity - 12'-16' Bodies - Class E

• *7 13/16" Mounting Height (minimum) - Mounts with 8" & Larger Long Sills
• *Pump Set at 3250 PSI (pump options) * Cylinder 6" & Chrome Shaft * Stroke 19" 
• *Approximate Weight 682 lbs. With subframe *approximate Weight 750 lbs.

LL-700 Lifting Capacity Chart Measured in Tons - 3200 PSI

Note:   (Use hoist calculator to estimate capacity)

>>HOIST CALCULATOR CLICK HERE<<

Overhang based on 32" from center line of tail hinge pin to center line of truck axle, with 2" clearance between cab and body.         

Capacities (Tons) are for a water level load including body weight plus payload weight, and assume payload to be centered in body front to back     

 Chart does not cover all mounting conditions. Call Tafco @ 507-526-3247                                                                                                               

(* electric pumps decrease capacity by approximately 10%) 

Large Truck Applications - 14'-18' Bodies - Class F

• *7 9/16" Mounting Height (minimum) - Mounts with 8" & Larger Long Sills
• *Pump Set at 3250 PSI (pump options) * Cylinder 6" & Chrome Shaft * Stroke 28" 
• *Approximate Weight 913 lbs.

LL-800 Lifting Capacity Chart Measured in Tons - 3200 PSI

Note: (Use hoist calculator to estimate capacity)   

>>HOIST CALCULATOR CLICK HERE<<

Overhang based on 32" from center line of tail hinge pin to center line of truck axle, with 2" clearance between cab and body.      

Capacities given include body weight plus payload weight, and assume payload to be centered in body front to back                         

 Chart does not cover all mounting conditions. Call Tafco @ 507-526-3247                                                                                                             

(* electric pumps decrease capacity by approximately 10%)